Eliminator-lighting LED Mushroom Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Eliminator-lighting LED Mushroom. Eliminator Lighting LED Mushroom User Manual [pl] [en] [cs] [de] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
LED Mushroom
SPECIFICATIONS:
Model: LED Mushroom
Supply Voltage: 100V ~ 240V 60Hz/50Hz
LEDs: 1 x 3W RGBWA LED
Power Consumption: 30W
Weight: 5 lbs./ 2.3kgs
Size: 14.25”(L) x 11”(W) x 11”(H)
Fuse: 2 Amp
Working Position: Any Safe position
Duty Cycle: None
Colors: RGBWA
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The LED Mushroom is a powerful effect for clubs and dj’s. The LED Mushroom creates a dramatic
cluster of stobing, multi-colored beams. This unit features an internal microphone that allows the
beams to be triggered by sound. The LED Mushroom is ready to be hung or set on the ground in a
safe position. When mounting this unit to truss be sure to use a clamp. Plug the unit in to a standard
wall outlet. After plugging the unit in, follow the directions on the reverse side to set the sound active
mode or DMX mode. In Sound Acive mode the fixture will react to the beat of the music via the
sound active internal microphone.
©Eliminator® Bell, CA. - wwwEliminatorLighting.com
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, LEDs, fuses, brushes and belts. Eliminator Lighting
warranty is only valid with-in the United States.
Caution! Never open unit when in use.
Always disconnect main power before
replacing the fuse. Remember to always
replace with the exact same type of fuse.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - LED Mushroom

LED Mushroom SPECIFICATIONS: Model: LED MushroomSupply Voltage: 100V ~ 240V 60Hz/50HzLEDs: 1 x 3W RGBWA LED Power Consumption: 30WWeight

Page 2 - DMX TRAITS: 3 CHANNELS

©Eliminator® Bell, CA. - wwwEliminatorLighting.comDMX TRAITS: 3 CHANNELSCHANNEL 1: COLOR MACROS0 - 4 = BLACKOUT5 - 9 = RED10 - 14 = GREEN15 -

Commentaires sur ces manuels

Pas de commentaire